Mfr Part # W013580138 Part # Variations: W01-358-0138, WO13580138, WO1-358-0138 Additional Info: WO1-358-0138, 274CT Style (Formerly 20) Airspring, Rubber Bellows Only
Qty
Unit price
Quantity
1
$239.96
AIRSTROKE ACTUATOR
Maximum Diameter @ 100 PSIG (inches)
9.9
Maximum Height (inches)
9.1
Maximum Stroke (inches)
6
Minimum Usable Height (inches)
3.1
Force @ 80PSI at Stroke of 1 Inch (pounds)
3790
Force @ 80PSI at Stroke of 3 Inch (pounds)
3180
Force @ 80PSI at Stroke of Maximum Stroke (pounds)
1770
Style Cross-Ref Equivalent High Strength Style Number
202
Style Cross-Ref Extended Height (Similar End Closure) Style Number
20-2
Material
2-Ply Standard Cord
AIRMOUNT ISOLATOR
Design Height
8.5
Load (at Design Height) at: 40 psig (pounds)
990
Load (at Design Height) at: 60 psig (pounds)
1540
Load (at Design Height) at: 80 psig (pounds)
2130
Natural Frequency (@80 psig) (cpm)
116
% of Isolation at Forced Frequency 400 CPM
90.7
% of Isolation at Forced Frequency 800 CPM
97.8
% of Isolation at Forced Frequency 1500 CPM
99.4
Firestone Industrial Products
W016537117
Firestone Airstroke™ actuators are being used in industrial applications as pneumatic actuators that play important roles in some of the most innovative modern machine design. Because of the Airstroke™ actuators durability, resiliency in abrasive environments and overall performance, these actuators can serve as replacements in applications using traditional pneumatic and hydraulic cylinders.
AirStroke™ Advantages
Affordable
In most cases, the Airstroke initial cost is about 50% less than more conventional pneumatic or hydraulic cylinders with the same force capabilities. The larger the size equals a greater savings.
Wide Range
Airstroke actuators are made in sizes that go from 2.2 in. to 37 in. in diameter. The force capability is 100,000 lbs. with the possibility of strokes of up to 14 in.
Durability
Airstroke actuators share many of the same qualities as Firestone's legendary Airide springs for truck and bus suspensions. The resiliency needed for millions of miles with heavy duty suspension use is designed to withstand adverse environmental conditions and other harsh situations.
No Internal Rod, Piston, or Sliding Seals
Within the Airstroke actuators, there are no internal rods, pistons, or sliding seals like many of the conventional cylinders, this gives Airstroke™ the advantage in applications where dirt or grit would erode conventional cylinder seals.
No Friction
With the absence of sliding seals, the Airstroke actuators have no breakaway friction.
Flexible
An Airstroke actuator works with diverse medias, either a liquid or gas (Please see datasheet for acceptable media choices.)
Angular Capabilities
An Airstroke stroke through an arc without a clevis creating the possibility of angular motion of up to 30 degrees.
Side Loading Capabilities
Airstroke actuators, under certain conditions, are unaffected by side loads. This eliminates the chances for rod bending, scoring, and excessive seal wear, common issues when using a conventional cylinder.
Compact Starting Height
Airstroke actuators have a low profile compared to conventional cylinders. The smallest Airstroke actuator (2.2 in./dia.) collapses to just 1.1 in. in height, while our largest triple convoluted Airstroke (37 in./dia.) will collapse to a very compact 5.5 in.
Factory Tested
Airstroke actuators feature Firestone's proven concept of crimped end plates. The crimped design allows for pre-shipment testing and quicker installation on equipment.
